SYSTEM UNLOCK
STATUS: LOCKED
Devices are shipped in Transport Lock mode. In this state, the unit will not respond to single presses (or will simply flash an LED without activating). This is a safeguard against accidental activation during transit.
* Locking is NOT a standard method for powering off. Use it only for transport or critical situations.
To override the lock, use either of the following two methods.
OPTION A: TACTICAL SEQUENCE
The fastest method once you master the rhythm.
Perform a series of 4 presses. The key is to avoid significant pauses.
Imagine you are tapping out a slow beat: "One... Two... Three... Four...".
OPTION B: TEMPORAL CAPTURE
The most reliable method. Eliminates rhythmic errors.
One (1) continuous press lasting strictly between 7 and 9 seconds.
Human perception of time is flawed. Do not count in your head.
STOPWATCH PROTOCOL:
- Place the device and your phone on a table.
- Open a "Stopwatch" app.
- Left finger — positioned over the "Start" button on the phone.
- Right finger — positioned on the jammer button (not pressed).
- SIMULTANEOUSLY tap the screen and press the device button.
- Release the device button immediately when you see: 00:07:00
Holding for less than 7 seconds or more than 9 seconds will result in no action. The system is protected against accidental prolonged presses in a pocket.
SUCCESS INDICATION
How to confirm the override?
SYSTEM ACTIVATED
You will see an escalating light sequence (a "fill" effect or running lights).
What's next?
The device is now active but in "idle" mode following the unlock.
- Switch it to Standby Mode: Press the button once (approx. 2 seconds duration); a fading light sequence will occur and the device will sleep.
- The device can now be woken up with a single press.
- Return to the roadmap and continue with configuration.