LED INDICATION PROTOCOL
The device communicates with you through the language of integrated LED flashes.
This page explains how to interpret and cross-reference system states (battery, mode, errors) when used without a phone, and details how the LEDs respond to remote commands via the app.
INDICATOR LAYOUT
Facing the PowerBank screen (digits or dots), the ports and LEDs are located at the top:
PHYSICAL CONTROL
Action: Pressing the button on the casing.
| Action | LED Response |
|---|---|
| 1 click Wi-Fi Start | ● Left: 1 short flash (0.3s). Initializes the communication module or confirms active status. |
| 2 clicks Base Mode | ● Right: 2 flashes. Launches preset AM1 + RF1. |
| 3 clicks Custom Mode | ● Right: 3 flashes. Launches user-defined mode from memory. |
| 12 clicks Wi-Fi Reset | ● Right: 5 fast flashes. Resets network settings to factory defaults. |
Button Hold Sequences
| 1 – 3.5 sec Shutdown | ● Right: 1 long flash (0.5s). Manual termination of all systems. |
| 4 – 7 sec RF Deactivator | ● ● Both: Flash synchronously once per second. Mode active while the button is held. |
| 7 – 9 sec Unlock | ● Right: Smooth Fade In. Exiting Transport Lock mode. |
| 11 – 15 sec Manual Mode | ● ● Both: 10 fast flashes. Service toggle for the Wi-Fi auto-start flag. |
📱 REMOTE CONTROL
Action: Pressing buttons in the web application.
| Command | LED Response |
|---|---|
| Any Button Settings | ● Left: 1 short flash. Confirmation of command reception. |
| OFF Stop Generation | ● Left: 1 short flash. Switching to Standby mode. |
| SHUTDOWN Full Power Off | ● Left: 3 fast flashes. Difference from hardware button: Left LED flashes. |
| UNLOCK Unlock | ● Right: Smooth Fade In. ● Left: 3 fast flashes. Visually brighter than hardware button unlock. |
| STEALTH OFF Disable Stealth | ● Left: 2 short flashes. Signal that visual indication has returned. |
BACKGROUND RHYTHM (HEARTBEAT)
Device behavior during active operation when idle.
| System State | Active LED | Rhythm |
|---|---|---|
| Mode 1 (AM+RF) | ● Right | Once every 5 sec |
| Mode 2 (Custom) | ● Right | Twice every 5 sec |
| Mode 3-Alarm | ● Right | Once every 3 sec |
| RF Deactivator | ● Right | Once per sec (High frequency) |
| Standby (Wi-Fi) | ● Left | Once every 9 sec |
| Wi-Fi Operation | ● Left | Once every 9 sec |
| Dev Mode | ● Left | Once every 3 sec |
| RF Deactivator (Remote) | ● Left | Once per sec (High frequency) |
BATTERY CRITICAL
Indication: Smooth Fade Out of the Right LED.
What happens: Charge level is critically low. The controller forces a power shutdown to protect the battery from permanent damage due to deep discharge.
STEALTH MODE
Indication: TOTAL DARKNESS.
If Stealth is activated in the settings, the firmware blocks all LED activity. The device remains operational but visually "silent."